3D-Printed Accessories for Feather Tripler Project

Collection of design files we have used with the Feather Tripler project. Parts are 3D-printed using ASA filament suitable for outdoor applications. The KiCad designs are open source can be modified to fit other types of enclosure and sensors.

SK-15 Mounting Bracket

About: Bracket for ziptying the SK-15 enclosure to posts or poles. Used in the open water level sensor project for example to mount the enclosure above a water surface.

Sensor Enclosure for Adafruit BME688 and PMSA003I

About: 3D-printed parts for mounting a PMSA003I Air Quality Breakout and small Adafruit sensor breakout board like the BME688 Temperature, Humidity, Pressure and Gas Sensor to the SK-15 Polycase. The sensors are mounted onto a "tray" that slides into the box with the cable passing through into the SK-15, connecting to the I2C header on the Feather Tripler.

Mount for Real-Time Clock

This is a small 3D-printed part for mounting an Adafruit PCF8523 Real Time Clock Breakout Board inside the Polycase enclosure, using the PCB mounting screws.