New Rodeostat Enclosure Design

The focus of this newsletter is the design of a new enclosure for our open source Rodeostat. Currently, the Rodeostat is sold with a simple enclosure which is laser cut from clear acrylic. This week we designed a new enclosure which can be 3D printed. We plan to manufacture prototypes of the new enclosure in black SLA resin. This will make a much sturdier enclosure that users can assemble even more easily than the current design. We will also make the design files available so that users can print and modify their own enclosures if they wish.  

Design with FreeCAD

We have been using FreeCAD for 3D hardware designs for a few years now and really enjoy working with it.  It is an open-source parametric 3D modeler with a very active and helpful user community.  It is multi-platform supporting Windows, Linux and Mac.  It has a built-in Python interpreter and is designed from the ground up to be deeply customizable.  There are loads of useful community developed external workbenches.  In this project we used the KiCad StepUp  workbench to import a 3D model of Rodeostat PCB from KiCad and the A2plus Workbench to create an assembly of the complete enclosure including PCB and fasteners.  Finally,  there are tons of great FreeCAD tutorials online to help you get started and advance your skills.

Enclosure components

The enclosure consists of two components - a base and top.  Shown below is the base. There are holes for mounting the PCB and cutouts for the screw terminals and 3-pin header. On the underside of the base corresponding to each screw holes is a hexagonal pocket for placing a nut (not shown).

Enclosure base

The top has the same corresponding corner holes for mounting the PCB with recessed pockets for the screw heads.  There are cutouts for the USB connection and expansion cables and we added a "RODEOSTAT" logo.

Enclosure top

Below is an exploded view of all the components, which we made using the A2Plus workbench. You can see the two parts of the enclosure plus the Rodeostat PCB and hardware (nuts, screws and rubber feet).

The two parts fit together snugly with the Rodeostat PCB sandwiched between the top and base of the enclosure.

Exploded view showing how the two enclosure parts fit together. You can also see the recessed holes on the top for the hardware

Below are some images of the final assembly

Top view of the enclosure design. You can see the recessed holes for the screw heads and the cutouts for cables
View of the Rodeostat enclosure base. Visible are the rubber feet (shown in blue) and recessed hexagonal pockets for nuts
Top view showing how the Rodeostat PCB (yellow) fits inside the enclosure

Rodeostat Enclosure Details

  • Dimensions: 95.7mm width x 133.8mm length x 28.2mm height
  • Two 3D-printed parts (base and top)  
  • Recessed pockets for hardware
  • Cutouts for cables and adapters
  • Hardware: 4 x 1" long 4-40 screws and 4 x 4-40 nuts
💡
Next steps: We will be 3D printing some prototypes of the design and we will share an update in a future Newsletter.

Bookmarks

Rodeostat: open source potentiostat
The Rodeostat is an open source potentiostat for performing electrochemical measurements which is designed to work with the Teensy 3.2 development board. It is a very flexible instrument with multiple output voltage and current measurement ranges. Current measurement ranges: +/- 1, 10, 100, 1000uA…
FreeCAD: Your own 3D parametric modeler
FreeCAD, the open source 3D parametric modeler